diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig
index aea8526..365501d 100644
--- a/arch/arm/mach-imx/mx7/Kconfig
+++ b/arch/arm/mach-imx/mx7/Kconfig
@@ -18,6 +18,13 @@
 	prompt "MX7 board select"
 	optional
 
+config TARGET_CL_SOM_IMX7
+	bool "CL-SOM-iMX7"
+	select MX7D
+	select DM
+	select DM_THERMAL
+	select SUPPORT_SPL
+
 config TARGET_MX7DSABRESD
 	bool "mx7dsabresd"
 	select BOARD_LATE_INIT
@@ -51,6 +58,7 @@
 config SYS_SOC
 	default "mx7"
 
+source "board/compulab/cl-som-imx7/Kconfig"
 source "board/freescale/mx7dsabresd/Kconfig"
 source "board/technexion/pico-imx7d/Kconfig"
 source "board/toradex/colibri_imx7/Kconfig"
diff --git a/board/compulab/cl-som-imx7/Kconfig b/board/compulab/cl-som-imx7/Kconfig
new file mode 100644
index 0000000..6d69cf3
--- /dev/null
+++ b/board/compulab/cl-som-imx7/Kconfig
@@ -0,0 +1,28 @@
+if TARGET_CL_SOM_IMX7
+
+config SYS_BOARD
+	default "cl-som-imx7"
+
+config SYS_VENDOR
+	default "compulab"
+
+config SYS_CONFIG_NAME
+	default "cl-som-imx7"
+
+config SYS_MMC_DEV
+	int
+	default 0
+
+config SYS_USB_DEV
+	int
+	default 0
+
+config SYS_MMC_IMG_LOAD_PART
+	int
+	default 1
+
+config SYS_USB_IMG_LOAD_PART
+	int
+	default 1
+
+endif
diff --git a/board/compulab/cl-som-imx7/MAINTAINERS b/board/compulab/cl-som-imx7/MAINTAINERS
new file mode 100644
index 0000000..2b917a5
--- /dev/null
+++ b/board/compulab/cl-som-imx7/MAINTAINERS
@@ -0,0 +1,6 @@
+CL-SOM-IMX7 BOARD
+M:	Uri Mashiach <uri.mashiach@compulab.co.il>
+S:	Maintained
+F:	board/compulab/cl-som-imx7
+F:	include/configs/cl-som-imx7.h
+F:	configs/cl-som-imx7_defconfig
diff --git a/board/compulab/cl-som-imx7/Makefile b/board/compulab/cl-som-imx7/Makefile
new file mode 100644
index 0000000..8f0e068
--- /dev/null
+++ b/board/compulab/cl-som-imx7/Makefile
@@ -0,0 +1,17 @@
+#
+# Makefile
+#
+# (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+#
+# Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y := mux.o common.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y  += spl.o
+else
+obj-y  += cl-som-imx7.o
+endif
diff --git a/board/compulab/cl-som-imx7/cl-som-imx7.c b/board/compulab/cl-som-imx7/cl-som-imx7.c
new file mode 100644
index 0000000..f8b1cda
--- /dev/null
+++ b/board/compulab/cl-som-imx7/cl-som-imx7.c
@@ -0,0 +1,331 @@
+/*
+ * U-Boot board functions for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mmc.h>
+#include <phy.h>
+#include <netdev.h>
+#include <fsl_esdhc.h>
+#include <power/pmic.h>
+#include <power/pfuze3000_pmic.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch-mx7/mx7-pins.h>
+#include <asm/arch-mx7/sys_proto.h>
+#include <asm/arch-mx7/clock.h>
+#include "../common/eeprom.h"
+#include "common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SYS_I2C_MXC
+
+#define I2C_PAD_CTRL		(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+				PAD_CTL_HYS)
+
+#define CL_SOM_IMX7_GPIO_I2C2_SCL	IMX_GPIO_NR(1, 6)
+#define CL_SOM_IMX7_GPIO_I2C2_SDA	IMX_GPIO_NR(1, 7)
+
+static struct i2c_pads_info cl_som_imx7_i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO06__I2C2_SCL |
+			MUX_PAD_CTRL(I2C_PAD_CTRL),
+		.gpio_mode = MX7D_PAD_GPIO1_IO06__GPIO1_IO6 |
+			MUX_PAD_CTRL(I2C_PAD_CTRL),
+		.gp = CL_SOM_IMX7_GPIO_I2C2_SCL,
+	},
+	.sda = {
+		.i2c_mode = MX7D_PAD_GPIO1_IO07__I2C2_SDA |
+			MUX_PAD_CTRL(I2C_PAD_CTRL),
+		.gpio_mode = MX7D_PAD_GPIO1_IO07__GPIO1_IO7 |
+			MUX_PAD_CTRL(I2C_PAD_CTRL),
+		.gp = CL_SOM_IMX7_GPIO_I2C2_SDA,
+	},
+};
+
+/*
+ * cl_som_imx7_setup_i2c() - I2C  pinmux configuration.
+ */
+static void cl_som_imx7_setup_i2c(void)
+{
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &cl_som_imx7_i2c_pad_info2);
+}
+#else /* !CONFIG_SYS_I2C_MXC */
+static void cl_som_imx7_setup_i2c(void) {}
+#endif /* CONFIG_SYS_I2C_MXC */
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define CL_SOM_IMX7_GPIO_USDHC3_PWR	IMX_GPIO_NR(6, 11)
+
+static struct fsl_esdhc_cfg cl_som_imx7_usdhc_cfg[3] = {
+	{USDHC1_BASE_ADDR, 0, 4},
+	{USDHC3_BASE_ADDR},
+};
+
+int board_mmc_init(bd_t *bis)
+{
+	int i, ret;
+	/*
+	 * According to the board_mmc_init() the following map is done:
+	 * (U-boot device node)    (Physical Port)
+	 * mmc0                    USDHC1
+	 * mmc2                    USDHC3 (eMMC)
+	 */
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			cl_som_imx7_usdhc1_pads_set();
+			gpio_request(CL_SOM_IMX7_GPIO_USDHC1_CD, "usdhc1_cd");
+			cl_som_imx7_usdhc_cfg[0].sdhc_clk =
+				mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+		case 1:
+			cl_som_imx7_usdhc3_emmc_pads_set();
+			gpio_request(CL_SOM_IMX7_GPIO_USDHC3_PWR, "usdhc3_pwr");
+			gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 0);
+			udelay(500);
+			gpio_direction_output(CL_SOM_IMX7_GPIO_USDHC3_PWR, 1);
+			cl_som_imx7_usdhc_cfg[1].sdhc_clk =
+				mxc_get_clock(MXC_ESDHC3_CLK);
+			break;
+		default:
+			printf("Warning: you configured more USDHC controllers "
+				"(%d) than supported by the board\n", i + 1);
+			return -EINVAL;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &cl_som_imx7_usdhc_cfg[i]);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+#ifdef CONFIG_FEC_MXC
+
+#define CL_SOM_IMX7_ETH1_PHY_NRST	IMX_GPIO_NR(1, 4)
+
+/*
+ * cl_som_imx7_rgmii_rework() - Ethernet PHY configuration.
+ */
+static void cl_som_imx7_rgmii_rework(struct phy_device *phydev)
+{
+	unsigned short val;
+
+	/* Ar8031 phy SmartEEE feature cause link status generates glitch,
+	 * which cause ethernet link down/up issue, so disable SmartEEE
+	 */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x3);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
+	val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
+	val &= ~(0x1 << 8);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
+
+	/* To enable AR8031 ouput a 125MHz clk from CLK_25M */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
+
+	val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
+	val &= 0xffe3;
+	val |= 0x18;
+	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
+
+	/* introduce tx clock delay */
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
+	val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
+	val |= 0x0100;
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	cl_som_imx7_rgmii_rework(phydev);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+
+/*
+ * cl_som_imx7_handle_mac_address() - set Ethernet MAC address environment.
+ *
+ * @env_var: MAC address environment variable
+ * @eeprom_bus: I2C bus of the environment EEPROM
+ *
+ * @return: 0 on success, < 0 on failure
+ */
+static int cl_som_imx7_handle_mac_address(char *env_var, uint eeprom_bus)
+{
+	int ret;
+	unsigned char enetaddr[6];
+
+	ret = eth_env_get_enetaddr(env_var, enetaddr);
+	if (ret)
+		return 0;
+
+	ret = cl_eeprom_read_mac_addr(enetaddr, eeprom_bus);
+	if (ret)
+		return ret;
+
+	ret = is_valid_ethaddr(enetaddr);
+	if (!ret)
+		return -1;
+
+	return eth_env_set_enetaddr(env_var, enetaddr);
+}
+
+#define CL_SOM_IMX7_FEC_DEV_ID_PRI 0
+
+int board_eth_init(bd_t *bis)
+{
+	/* set Ethernet MAC address environment */
+	cl_som_imx7_handle_mac_address("ethaddr", CONFIG_SYS_I2C_EEPROM_BUS);
+	/* Ethernet interface pinmux configuration  */
+	cl_som_imx7_phy1_rst_pads_set();
+	cl_som_imx7_fec1_pads_set();
+	/* PHY reset */
+	gpio_request(CL_SOM_IMX7_ETH1_PHY_NRST, "eth1_phy_nrst");
+	gpio_direction_output(CL_SOM_IMX7_ETH1_PHY_NRST, 0);
+	mdelay(10);
+	gpio_set_value(CL_SOM_IMX7_ETH1_PHY_NRST, 1);
+	/* MAC initialization */
+	return fecmxc_initialize_multi(bis, CL_SOM_IMX7_FEC_DEV_ID_PRI,
+				       CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE);
+}
+
+/*
+ * cl_som_imx7_setup_fec() - Ethernet MAC 1 clock configuration.
+ * - ENET1 reference clock mode select.
+ * - ENET1_TX_CLK output driver is disabled when configured for ALT1.
+ */
+static void cl_som_imx7_setup_fec(void)
+{
+	struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs
+		= (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+	/* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/
+	clrsetbits_le32(&iomuxc_gpr_regs->gpr[1],
+			(IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK |
+			 IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0);
+
+	set_clk_enet(ENET_125MHZ);
+}
+#else /* !CONFIG_FEC_MXC */
+static void cl_som_imx7_setup_fec(void) {}
+#endif /* CONFIG_FEC_MXC */
+
+#ifdef CONFIG_SPI
+
+static void cl_som_imx7_spi_init(void)
+{
+	cl_som_imx7_espi1_pads_set();
+}
+#else /* !CONFIG_SPI */
+static void cl_som_imx7_spi_init(void) {}
+#endif /* CONFIG_SPI */
+
+int board_early_init_f(void)
+{
+	cl_som_imx7_uart1_pads_set();
+	cl_som_imx7_usb_otg1_pads_set();
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+	cl_som_imx7_setup_i2c();
+	cl_som_imx7_setup_fec();
+	cl_som_imx7_spi_init();
+
+	return 0;
+}
+
+#ifdef CONFIG_POWER
+#define I2C_PMIC	0
+int power_init_board(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg, rev_id;
+
+	ret = power_pfuze3000_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("PFUZE3000");
+	ret = pmic_probe(p);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(p, PFUZE3000_DEVICEID, &reg);
+	pmic_reg_read(p, PFUZE3000_REVID, &rev_id);
+	printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+
+	/* disable Low Power Mode during standby mode */
+	pmic_reg_write(p, PFUZE3000_LDOGCTL, 0x1);
+
+	return 0;
+}
+#endif /* CONFIG_POWER */
+
+/*
+ * cl_som_imx7_setup_wdog() - watchdog configuration.
+ * - Output WDOG_B signal to reset external pmic.
+ * - Suspend the watchdog timer during low-power modes.
+ */
+void cl_som_imx7_setup_wdog(void)
+{
+	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
+
+	cl_som_imx7_wdog_pads_set();
+	set_wdog_reset(wdog);
+       /*
+	* Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4),
+	* since we use PMIC_PWRON to reset the board.
+	*/
+	clrsetbits_le16(&wdog->wcr, 0, 0x10);
+}
+
+int board_late_init(void)
+{
+	env_set("board_name", "CL-SOM-iMX7");
+	cl_som_imx7_setup_wdog();
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *mode;
+
+	if (IS_ENABLED(CONFIG_ARMV7_BOOT_SEC_DEFAULT))
+		mode = "secure";
+	else
+		mode = "non-secure";
+
+	printf("Board: CL-SOM-iMX7 in %s mode\n", mode);
+
+	return 0;
+}
diff --git a/board/compulab/cl-som-imx7/common.c b/board/compulab/cl-som-imx7/common.c
new file mode 100644
index 0000000..5ee688a
--- /dev/null
+++ b/board/compulab/cl-som-imx7/common.c
@@ -0,0 +1,46 @@
+/*
+ * SPL/U-Boot common functions for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <fsl_esdhc.h>
+#include <asm-generic/gpio.h>
+#include "common.h"
+
+#ifdef CONFIG_SPI
+
+#define CL_SOM_IMX7_GPIO_SPI_CS	IMX_GPIO_NR(4, 19)
+
+int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
+{
+	return CL_SOM_IMX7_GPIO_SPI_CS;
+}
+
+#endif /* CONFIG_SPI */
+
+#ifdef CONFIG_FSL_ESDHC
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
+	int ret = 0;
+
+	switch (cfg->esdhc_base) {
+	case USDHC1_BASE_ADDR:
+		ret = !gpio_get_value(CL_SOM_IMX7_GPIO_USDHC1_CD);
+		break;
+	case USDHC3_BASE_ADDR:
+		ret = 1; /* Assume uSDHC3 emmc is always present */
+		break;
+	}
+
+	return ret;
+}
+
+#endif /* CONFIG_FSL_ESDHC */
diff --git a/board/compulab/cl-som-imx7/common.h b/board/compulab/cl-som-imx7/common.h
new file mode 100644
index 0000000..72d96af
--- /dev/null
+++ b/board/compulab/cl-som-imx7/common.h
@@ -0,0 +1,32 @@
+/*
+ * SPL/U-Boot common header file for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#define PADS_SET_PROT(pads_array) void cl_som_imx7_##pads_array##_set(void)
+
+#ifdef CONFIG_FSL_ESDHC
+#define CL_SOM_IMX7_GPIO_USDHC1_CD	IMX_GPIO_NR(5, 0)
+PADS_SET_PROT(usdhc1_pads);
+#endif /* CONFIG_FSL_ESDHC */
+PADS_SET_PROT(uart1_pads);
+#ifdef CONFIG_SPI
+PADS_SET_PROT(espi1_pads);
+#endif /* CONFIG_SPI */
+
+#ifndef CONFIG_SPL_BUILD
+#ifdef CONFIG_FSL_ESDHC
+PADS_SET_PROT(usdhc3_emmc_pads);
+#endif /* CONFIG_FSL_ESDHC */
+#ifdef CONFIG_FEC_MXC
+PADS_SET_PROT(phy1_rst_pads);
+PADS_SET_PROT(fec1_pads);
+#endif /* CONFIG_FEC_MXC */
+PADS_SET_PROT(usb_otg1_pads);
+PADS_SET_PROT(wdog_pads);
+#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cl-som-imx7/mux.c b/board/compulab/cl-som-imx7/mux.c
new file mode 100644
index 0000000..82e8b9f
--- /dev/null
+++ b/board/compulab/cl-som-imx7/mux.c
@@ -0,0 +1,142 @@
+/*
+ * SPL/U-Boot mux functions for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch-mx7/mx7-pins.h>
+
+#define PADS_SET(pads_array)						       \
+void cl_som_imx7_##pads_array##_set(void)				       \
+{									       \
+	imx_iomux_v3_setup_multiple_pads(pads_array, ARRAY_SIZE(pads_array));  \
+}
+
+#ifdef CONFIG_FSL_ESDHC
+
+#define USDHC_PAD_CTRL		(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
+				PAD_CTL_HYS | PAD_CTL_PUE | \
+				PAD_CTL_PUS_PU47KOHM)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+PADS_SET(usdhc1_pads)
+
+#endif /* CONFIG_FSL_ESDHC */
+
+#define UART_PAD_CTRL		(PAD_CTL_DSE_3P3V_49OHM | \
+				PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+PADS_SET(uart1_pads)
+
+#ifdef CONFIG_SPI
+
+#define SPI_PAD_CTRL	(PAD_CTL_HYS | PAD_CTL_SRE_SLOW | \
+			PAD_CTL_DSE_3P3V_32OHM)
+
+#define GPIO_PAD_CTRL	(PAD_CTL_PUS_PU5KOHM | PAD_CTL_PUE | \
+			PAD_CTL_SRE_SLOW)
+
+static iomux_v3_cfg_t const espi1_pads[] = {
+	MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
+};
+
+PADS_SET(espi1_pads)
+
+#endif /* CONFIG_SPI */
+
+#ifndef CONFIG_SPL_BUILD
+
+#ifdef CONFIG_FSL_ESDHC
+
+static iomux_v3_cfg_t const usdhc3_emmc_pads[] = {
+	MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX7D_PAD_SD3_STROBE__SD3_STROBE	 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+
+	MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+PADS_SET(usdhc3_emmc_pads)
+
+#endif /* CONFIG_FSL_ESDHC */
+
+#ifdef CONFIG_FEC_MXC
+
+#define ENET_PAD_CTRL		(PAD_CTL_PUS_PD100KOHM | PAD_CTL_DSE_3P3V_49OHM)
+#define ENET_PAD_CTRL_MII	(PAD_CTL_PUS_PU5KOHM)
+
+static iomux_v3_cfg_t const phy1_rst_pads[] = {
+	/* PHY1 RST */
+	MX7D_PAD_GPIO1_IO04__GPIO1_IO4	| MUX_PAD_CTRL(GPIO_PAD_CTRL),
+};
+
+PADS_SET(phy1_rst_pads)
+
+static iomux_v3_cfg_t const fec1_pads[] = {
+	MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL |
+	MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL |
+	MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
+	MX7D_PAD_SD2_CD_B__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+	MX7D_PAD_SD2_WP__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII),
+};
+
+PADS_SET(fec1_pads)
+
+#endif /* CONFIG_FEC_MXC */
+
+static iomux_v3_cfg_t const usb_otg1_pads[] = {
+	MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+PADS_SET(usb_otg1_pads)
+
+static iomux_v3_cfg_t const wdog_pads[] = {
+	MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+PADS_SET(wdog_pads)
+
+#endif /* !CONFIG_SPL_BUILD */
diff --git a/board/compulab/cl-som-imx7/spl.c b/board/compulab/cl-som-imx7/spl.c
new file mode 100644
index 0000000..3b013c0
--- /dev/null
+++ b/board/compulab/cl-som-imx7/spl.c
@@ -0,0 +1,211 @@
+/*
+ * SPL board functions for CompuLab CL-SOM-iMX7 module
+ *
+ * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
+ *
+ * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+#include <fsl_esdhc.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/arch-mx7/mx7-pins.h>
+#include <asm/arch-mx7/clock.h>
+#include <asm/arch-mx7/mx7-ddr.h>
+#include "common.h"
+
+#ifdef CONFIG_FSL_ESDHC
+
+static struct fsl_esdhc_cfg cl_som_imx7_spl_usdhc_cfg = {
+	USDHC1_BASE_ADDR, 0, 4};
+
+int board_mmc_init(bd_t *bis)
+{
+	cl_som_imx7_usdhc1_pads_set();
+	cl_som_imx7_spl_usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+	return fsl_esdhc_initialize(bis, &cl_som_imx7_spl_usdhc_cfg);
+}
+#endif /* CONFIG_FSL_ESDHC */
+
+static iomux_v3_cfg_t const led_pads[] = {
+	MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 | MUX_PAD_CTRL(PAD_CTL_PUS_PU5KOHM |
+		PAD_CTL_PUE | PAD_CTL_SRE_SLOW)
+};
+
+static struct ddrc cl_som_imx7_spl_ddrc_regs_val = {
+	.init1		= 0x00690000,
+	.init0		= 0x00020083,
+	.init3		= 0x09300004,
+	.init4		= 0x04080000,
+	.init5		= 0x00100004,
+	.rankctl	= 0x0000033F,
+	.dramtmg1	= 0x0007020E,
+	.dramtmg2	= 0x03040407,
+	.dramtmg3	= 0x00002006,
+	.dramtmg4	= 0x04020305,
+	.dramtmg5	= 0x03030202,
+	.dramtmg8	= 0x00000803,
+	.zqctl0		= 0x00810021,
+	.dfitmg0	= 0x02098204,
+	.dfitmg1	= 0x00030303,
+	.dfiupd0	= 0x80400003,
+	.dfiupd1	= 0x00100020,
+	.dfiupd2	= 0x80100004,
+	.addrmap4	= 0x00000F0F,
+	.odtcfg		= 0x06000604,
+	.odtmap		= 0x00000001,
+};
+
+static struct ddrc_mp cl_som_imx7_spl_ddrc_mp_val = {
+	.pctrl_0	= 0x00000001,
+};
+
+static struct ddr_phy cl_som_imx7_spl_ddr_phy_regs_val = {
+	.phy_con0	= 0x17420F40,
+	.phy_con1	= 0x10210100,
+	.phy_con4	= 0x00060807,
+	.mdll_con0	= 0x1010007E,
+	.drvds_con0	= 0x00000D6E,
+	.cmd_sdll_con0	= 0x00000010,
+	.offset_lp_con0	= 0x0000000F,
+};
+
+struct mx7_calibration cl_som_imx7_spl_calib_param = {
+	.num_val	= 5,
+	.values		= {
+		0x0E407304,
+		0x0E447304,
+		0x0E447306,
+		0x0E447304,
+		0x0E407304,
+	},
+};
+
+static void cl_som_imx7_spl_dram_cfg_size(u32 ram_size)
+{
+	switch (ram_size) {
+	case SZ_256M:
+		cl_som_imx7_spl_ddrc_regs_val.mstr		= 0x01041001;
+		cl_som_imx7_spl_ddrc_regs_val.rfshtmg		= 0x00400046;
+		cl_som_imx7_spl_ddrc_regs_val.dramtmg0		= 0x090E1109;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap0		= 0x00000014;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap1		= 0x00151515;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap5		= 0x03030303;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap6		= 0x0F0F0303;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0	= 0x0C0C0C0C;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0	= 0x04040404;
+		break;
+	case SZ_512M:
+		cl_som_imx7_spl_ddrc_regs_val.mstr		= 0x01040001;
+		cl_som_imx7_spl_ddrc_regs_val.rfshtmg		= 0x00400046;
+		cl_som_imx7_spl_ddrc_regs_val.dramtmg0		= 0x090E1109;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap0		= 0x00000015;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap1		= 0x00161616;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap5		= 0x04040404;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap6		= 0x0F0F0404;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0	= 0x0C0C0C0C;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0	= 0x04040404;
+		break;
+	case SZ_1G:
+		cl_som_imx7_spl_ddrc_regs_val.mstr		= 0x01040001;
+		cl_som_imx7_spl_ddrc_regs_val.rfshtmg		= 0x00400046;
+		cl_som_imx7_spl_ddrc_regs_val.dramtmg0		= 0x090E1109;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap0		= 0x00000016;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap1		= 0x00171717;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap5		= 0x04040404;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap6		= 0x0F040404;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0	= 0x0A0A0A0A;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0	= 0x02020202;
+		break;
+	case SZ_2G:
+		cl_som_imx7_spl_ddrc_regs_val.mstr		= 0x01040001;
+		cl_som_imx7_spl_ddrc_regs_val.rfshtmg		= 0x0040005E;
+		cl_som_imx7_spl_ddrc_regs_val.dramtmg0		= 0x090E110A;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap0		= 0x00000018;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap1		= 0x00181818;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap5		= 0x04040404;
+		cl_som_imx7_spl_ddrc_regs_val.addrmap6		= 0x04040404;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_rd_con0	= 0x0A0A0A0A;
+		cl_som_imx7_spl_ddr_phy_regs_val.offset_wr_con0	= 0x04040404;
+		break;
+	}
+
+	mx7_dram_cfg(&cl_som_imx7_spl_ddrc_regs_val,
+		     &cl_som_imx7_spl_ddrc_mp_val,
+		     &cl_som_imx7_spl_ddr_phy_regs_val,
+		     &cl_som_imx7_spl_calib_param);
+}
+
+static void cl_som_imx7_spl_dram_cfg(void)
+{
+	ulong ram_size_test, ram_size = 0;
+
+	for (ram_size = SZ_2G; ram_size >= SZ_256M; ram_size >>= 1) {
+		cl_som_imx7_spl_dram_cfg_size(ram_size);
+		ram_size_test = get_ram_size((long int *)PHYS_SDRAM, ram_size);
+		if (ram_size_test == ram_size)
+			break;
+	}
+
+	if (ram_size < SZ_256M) {
+		puts("!!!ERROR!!! DRAM detection failed!!!\n");
+		hang();
+	}
+}
+
+#ifdef CONFIG_SPL_SPI_SUPPORT
+
+static void cl_som_imx7_spl_spi_init(void)
+{
+	cl_som_imx7_espi1_pads_set();
+}
+#else /* !CONFIG_SPL_SPI_SUPPORT */
+static void cl_som_imx7_spl_spi_init(void) {}
+#endif /* CONFIG_SPL_SPI_SUPPORT */
+
+void board_init_f(ulong dummy)
+{
+	imx_iomux_v3_setup_multiple_pads(led_pads, 1);
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+	/* setup GP timer */
+	timer_init();
+	cl_som_imx7_spl_spi_init();
+	cl_som_imx7_uart1_pads_set();
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+	/* DRAM detection  */
+	cl_som_imx7_spl_dram_cfg();
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
+
+void spl_board_init(void)
+{
+	u32 boot_device = spl_boot_device();
+
+	if (boot_device == BOOT_DEVICE_SPI)
+		puts("Booting from SPI flash\n");
+	else if (boot_device == BOOT_DEVICE_MMC1)
+		puts("Booting from SD card\n");
+	else
+		puts("Unknown boot device\n");
+}
+
+void board_boot_order(u32 *spl_boot_list)
+{
+	spl_boot_list[0] = spl_boot_device();
+	switch (spl_boot_list[0]) {
+	case BOOT_DEVICE_SPI:
+		spl_boot_list[1] = BOOT_DEVICE_MMC1;
+		break;
+	case BOOT_DEVICE_MMC1:
+		spl_boot_list[1] = BOOT_DEVICE_SPI;
+		break;
+	}
+}
diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig
new file mode 100644
index 0000000..6c1d241
--- /dev/null
+++ b/configs/cl-som-imx7_defconfig
@@ -0,0 +1,54 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX7=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_TARGET_CL_SOM_IMX7=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_ARMV7_BOOT_SEC_DEFAULT=y
+CONFIG_IMX_RDC=y
+CONFIG_IMX_BOOTAUX=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
+CONFIG_SPI_BOOT=y
+CONFIG_BOOTDELAY=3
+CONFIG_SPL=y
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="CL-SOM-iMX7 # "
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_MXC_USB_OTG_HACTIVE=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_CI_UDC=y
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/cl-som-imx7.h b/include/configs/cl-som-imx7.h
new file mode 100644
index 0000000..14c4712
--- /dev/null
+++ b/include/configs/cl-som-imx7.h
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) 2015 CompuLab, Ltd.
+ *
+ * Configuration settings for the CompuLab CL-SOM-iMX7 System-on-Module.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CL_SOM_IMX7_CONFIG_H
+#define __CL_SOM_IMX7_CONFIG_H
+
+#include "mx7_common.h"
+
+#define CONFIG_DBG_MONITOR
+
+#define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(32 * SZ_1M)
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Uncomment to enable secure boot support */
+/* #define CONFIG_SECURE_BOOT */
+#define CONFIG_CSF_SIZE			0x4000
+
+/* Network */
+#define CONFIG_FEC_MXC
+#define CONFIG_MII
+#define CONFIG_FEC_XCV_TYPE             RGMII
+#define CONFIG_ETHPRIME                 "FEC"
+#define CONFIG_FEC_MXC_PHYADDR          0
+
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_ATHEROS
+/* ENET1 */
+#define IMX_FEC_BASE			ENET_IPS_BASE_ADDR
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE3000
+#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
+
+#undef CONFIG_BOOTM_NETBSD
+#undef CONFIG_BOOTM_PLAN9
+#undef CONFIG_BOOTM_RTEMS
+
+/* I2C configs */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C2		/* Enable I2C bus 2 */
+#define CONFIG_SYS_I2C_SPEED		100000
+#define SYS_I2C_BUS_SOM			0
+
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_I2C_EEPROM_BUS	SYS_I2C_BUS_SOM
+
+#define CONFIG_PCA953X
+#define CONFIG_CMD_PCA953X
+#define CONFIG_SYS_I2C_PCA953X_ADDR	0x20
+#define CONFIG_SYS_I2C_PCA953X_WIDTH	{ {0x20, 16} }
+
+#undef CONFIG_SYS_AUTOLOAD
+#undef CONFIG_EXTRA_ENV_SETTINGS
+#undef CONFIG_BOOTCOMMAND
+#undef CONFIG_BOOTDELAY
+
+#define CONFIG_BOOTDELAY		3
+#define CONFIG_SYS_AUTOLOAD		"no"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"autoload=off\0" \
+	"script=boot.scr\0" \
+	"loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0" \
+	"loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0" \
+	"loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${fdtfile};\0" \
+	"bootscript=echo Running bootscript from ${storagetype} ...; source ${loadaddr};\0" \
+	"storagebootcmd=echo Booting from ${storagetype} ...; run ${storagetype}args; run doboot;\0" \
+	"kernel=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdtfile=imx7d-sbc-imx7.dtb\0" \
+	"fdtaddr=0x83000000\0" \
+	"mmcdev_def="__stringify(CONFIG_SYS_MMC_DEV)"\0" \
+	"usbdev_def="__stringify(CONFIG_SYS_USB_DEV)"\0" \
+	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
+	"usbpart=" __stringify(CONFIG_SYS_USB_IMG_LOAD_PART) "\0" \
+	"doboot=bootz ${loadaddr} - ${fdtaddr}\0" \
+	"mmc_config=mmc dev ${mmcdev}; mmc rescan\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/mmcblk${mmcblk}p2 rootwait rw\0" \
+	"mmcbootscript=" \
+		"if run mmc_config; then " \
+			"setenv storagetype mmc;" \
+			"setenv storagedev ${mmcdev}:${mmcpart};" \
+			"if run loadscript; then " \
+				"run bootscript; " \
+			"fi; " \
+		"fi;\0" \
+	"mmcboot=" \
+		"if run mmc_config; then " \
+			"setenv storagetype mmc;" \
+			"setenv storagedev ${mmcdev}:${mmcpart};" \
+			"if run loadkernel; then " \
+				"if run loadfdt; then " \
+					"run storagebootcmd;" \
+				"fi; " \
+			"fi; " \
+		"fi;\0" \
+	"sdbootscript=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; " \
+		"run mmcbootscript\0" \
+	"usbbootscript=setenv usbdev ${usbdev_def}; " \
+		"setenv storagetype usb;" \
+		"setenv storagedev ${usbdev}:${usbpart};" \
+		"if run loadscript; then " \
+			"run bootscript; " \
+		"fi; " \
+	"sdboot=setenv mmcdev ${mmcdev_def}; setenv mmcblk 0; run mmcboot\0" \
+	"emmcbootscript=setenv mmcdev 1; setenv mmcblk 2; run mmcbootscript\0" \
+	"emmcboot=setenv mmcdev 1; setenv mmcblk 2; run mmcboot\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"echo SD boot attempt ...; run sdbootscript; run sdboot; " \
+	"echo eMMC boot attempt ...; run emmcbootscript; run emmcboot; " \
+	"echo USB boot attempt ...; run usbbootscript; "
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+#define CONFIG_SYS_HZ			1000
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/* SPI Flash support */
+#define CONFIG_SPI
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		0
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
+
+/* FLASH and environment organization */
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_OFFSET		(768 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(64 * 1024)
+#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
+
+/* MMC Config*/
+#define CONFIG_FSL_USDHC
+#ifdef CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC1_BASE_ADDR
+
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_MMCROOT			"/dev/mmcblk0p2" /* USDHC1 */
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+#endif
+
+/* USB Configs */
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+/* Uncomment to enable iMX thermal driver support */
+/*#define CONFIG_IMX_THERMAL*/
+
+/* SPL */
+#include "imx7_spl.h"
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
+#endif /* CONFIG_SPL_BUILD */
+
+#endif	/* __CONFIG_H */